Three men stand in front of an open industrial molding machine, examining a large plastic part. Cables and equipment are visible inside, and the setting appears to be a factory or manufacturing facility.

Complete plastic contract manufacturing in Georgia

Operating from more than 240,000+ sq. ft. in Austell, Georgia, Elevate Solutions Group delivers full-service vertically integrated plastic contract manufacturing backed by an ISO 9001:2015 certified quality management system and FDA-registered facility 3015533540 status.

Equipped with 30+ Nissei, Engel, and Arburg injection molding presses ranging from 80-ton to 950-ton clamping capacity, our plant integrates precision custom molding, front-end Design for Manufacturing (DFM) optimization, press-side kitting and automated assembly, and co-located 3PL warehousing across a 200-mile regional radius of Atlanta. For OEMs scaling high-reliability production programs, we execute turnkey contract manufacturing solutions engineered for seamless commercial execution.

Quality system verification and regulatory compliance framework

Enforcing rigorous quality management systems, our ISO 9001:2015-certified quality infrastructure governs every production stage of plastic contract manufacturing in Georgia. Operating as an FDA-registered facility 3015533540 and Certified Board of Pharmacy Third Party Distributor, Elevate Solutions Group produces tight-tolerance parts for demanding medical device(s) and telecom assemblies. Automated Zeiss 3D Coordinate Measuring Machine (CMM) inspection measures part geometry to +/- 0.0001.

Receiving inspection procedures validate resin melt flow index and moisture content prior to press loading. In-process statistical process control (SPC) monitors critical dimension stability across multi-cavity production runs. Expanding our quality framework, we are actively advancing toward our planned 2026 ISO 13485 compliance target and goals to install both white room and Class 8 cleanroom manufacturing and assembly environments.

Close-up view of an injection molding machine with metal parts, wires, and hydraulic hoses in a factory setting. The machine is open, revealing its inner components essential for plastic manufacturing.

30+ injection molding press infrastructure and regional fleet capacity in Georgia

Operating as established injection molders in Georgia, Elevate Solutions Group runs a 240,000+ sq. ft. manufacturing campus in Austell, GA. This location sits directly along the primary Atlanta regional freight corridor, supporting rapid dispatch across a 200-mile regional radius.

Running 30+ Nissei, Engel, and Arburg injection molding presses spanning 80-ton to 950-ton clamping capacities, our plant executes precision plastic injection molding in Georgia, including new two-shot molding capabilities.

Sourcing managers evaluating custom injection molding services and searching for injection molders near me gain direct access to our advanced press fleet. High-density warehousing infrastructure includes 14,000+ computer-located pallet positions and 30 cross-dock shipping doors. Cross-functional engineering teams process full 3D CAD drawings and often deliver formal quotes within 24-48 hours of receipt.

Custom injection molding and technical resin processing

Delivering custom injection molding in Georgia, our seasoned engineering team structures polymer selection across three distinct technical tiers through specialized materials processing engineering.

1.) Tier 1 polyolefins include polypropylene and polyethylene for structural frameworks and durable consumer components.

2.) Tier 2 engineering resins incorporate high-impact polycarbonates, nylons, and ABS engineered for extreme mechanical loading in telecom and medical devices.

3.) Tier 3 formulations process sustainable PCR resins, bioplastics, and closed-loop recyclable compounds. Microsecond electric servo motors maintain exact injection velocity, clamping force, and packing pressure.

Four silos and a central feeding system route resins directly to their respective injection molding presses for volume production that runs reliably and economically. Inline color accuracy is measured to within 1g per gaylord of material. Fully integrated robotics and conveyors keep the parts moving toward assembly and packaging cells.

A person operates a MICRO-VU machine, observing data on a monitor and adjusting controls, in a contract manufacturing lab in Georgia with a wall-mounted whiteboard and various office equipment.

Design for manufacturing optimization and legacy tool restoration

Executing front-end Design for Manufacturing (DFM) reviews, our tooling engineers analyze wall transitions, draft angles, rib placement, and gate orientation before cutting steel. Proper draft angles prevent part ejection scoring, while balanced wall ratios eliminate internal shear stresses.

Elevate Solutions Group manages complex tool transfers to onboard tooling programs from underperforming suppliers without interrupting production schedules. In-house tooling technicians recondition worn mold components and repair damaged multi-cavity legacy tooling to eliminate parting-line flash and restore nominal cycle times during plastic contract manufacturing in Georgia execution. Standardized preventive maintenance protocols track shot counts to preserve tool integrity over multi-million-cycle production programs.

A cardboard box filled with neatly stacked white plastic brackets or holders, with two larger pieces placed on top at the front of the box—an excellent example of precision and quality often found in contract manufacturing facilities in Georgia.

Press-side kitting, mechanical assembly, and secondary operations

Integrating press-side assembly cells (manual, semi-automatic, and fully-automatic) directly alongside molding lines streamlines production for complex OEM programs. Skilled team members execute secondary operations such as mechanical assembly, hardware insertion, heat transfer graphic printing, and ultrasonic welding during molding cycles.

Dedicated operators run turnkey custom kitting and assembly cells configured for multi-part packaging sets. Automated optical scanning stations enforce 100% precision label UPC matching at press side, eliminating scanning failures and downstream retail vendor chargebacks.

These press-side operations connect directly with our 3PL fulfillment operations, where finished goods move seamlessly between warehousing and their final destination.

A warehouse with tall metal racks stacked with large boxes and products wrapped in plastic, labeled with numbered signs from 6 to 11, features a spacious, well-lit industrial setting ideal for kitting and molding operations.

Integrated 3PL warehousing and domestic supply chain logistics

Co-locating manufacturing and logistics in Austell, GA reduces freight handling and transit lead times. Utilizing 14,000+ computer-located pallet positions managed by a centralized WMS, our team coordinates custom vendor-managed inventory (VMI) and safety stock buffers as a vertically integrated contract manufacturer.

Operating 30 cross-dock shipping doors allows continuous daily freight dispatch across Southeast shipping lanes. We’ve established domestic production buffers to protect OEM supply chains against international ocean freight congestion, port bottlenecks, and long overseas transit delays.

Connected data visibility across molding and fulfillment

Beyond physical warehousing, Elevate Solutions Group leverages DELMIAWorks and Data Integration as a Service to connect complex molding schedules, inventory tracking, and shipment planning into one shared operational interface. Real-time data sync eliminates manual status reporting and gives OEM procurement teams full visibility into production pipelines.

A large industrial SPAR-branded robotic arm labeled LW-1200VI operates above a glass enclosure in a factory with high ceilings and visible safety signs, supporting kitting and plastic manufacturing processes.

Frequently asked questions – plastic contract manufacturing in Georgia

What plastic contract manufacturing services does Elevate Solutions Group offer in Georgia?

Elevate Solutions Group provides turnkey plastic contract manufacturing Georgia solutions from a 240,000+ sq. ft. manufacturing campus in Austell, GA. Core operations integrate custom injection molding across three shifts, utilizing Nissei, Engel, and Arburg presses (80-ton to 950-ton clamping force), front-end DFM analysis, press-side kitting and assembly, automated barcode labeling, and co-located 3PL warehousing featuring 30 cross-dock shipping doors.

Where is Elevate Solutions Group located and what regions do you serve?

Our corporate manufacturing facility is strategically located at 7900 Troon Circle SW, Austell, GA 30168, positioned directly along the primary Atlanta regional freight corridor. We serve OEM partners with daily shipments regionally, throughout the country, and internationally.

What quality certifications and regulatory registrations does Elevate Solutions Group hold?

Elevate Solutions Group maintains an ISO 9001:2015-certified quality management system, an active FDA-registered facility, and holds a Certified Board of Pharmacy Third Party Distributor license. To support expanding medical device manufacturing requirements, Elevate Solutions Group is actively advancing toward its scheduled 2026 ISO 13485 compliance target, along with planned 2026 white room and Class 8 cleanroom installations. Review our ISO 9001:2015 quality assurance protocols for full audit documentation.

How does Elevate Solutions Group assist OEMs with design for manufacturing and legacy tool transfers?

Tooling engineers perform front-end reviews to evaluate wall uniformity, draft angles, gate orientation, and rib structures prior to steel cutting. For active production programs, Elevate Solutions Group manages complex tool transfers, receiving legacy molds—including damaged multi-cavity tooling—and executing in-house custom tool repairs to eliminate parting-line flash and restore nominal cycle times during plastic contract manufacturing in Georgia execution.

What plastic resin materials can be processed at your Austell, GA plant?

Polymer processing spans three distinct technical tiers: Tier 1 Commodity Polyolefins (polypropylene and polyethylene for durable consumer components), Tier 2 Technical Engineering Resins (polycarbonates, nylons, and ABS engineered for high mechanical loading in telecom and medical devices), and Tier 3 Sustainable Resins (Post-Consumer Recycled PCR materials, bio-plastics, and closed-loop recyclable compounds).

What is the standard turnaround time for custom molding and contract manufacturing quotes?

Depending on program complexity, cross-functional engineering teams evaluate complete CAD models and quality requirements to deliver formal unit-cost and tooling quotes often within 24-48 hours of receipt.